Mill File - 1 and 2 Round Edge

American Pattern Mill Files with one or two Round Edges

$1.00
Details

Mill File – 1 and 2 Round Edge

Same Rectangular shape as single cut Mill Files without taper to the point (blunt - parallel sides) with one square cut edge, one rounded cut edge or with two rounded cut edges. The file name came from their most common use in years gone by, sharpening very large circular saws in lumber mills. An example application is to clean out the gullets (valley between the teeth) of saws with the round edge as well as sharpen the saw tooth. All meet or exceed US Government specification GGG-F-325b.


                                                                                        Premium North American Made
          
                                                                                       One                  Two             Qty./
     Length                  Steel Section                                   Round Edge       Round Edge      Box     Wt./Doz.                       

  6” (150mm)    19/32” x 7/64” (15.08 x 2.78mm)                                                  -                        15216                   12      1.2 lb./0.54 kg
  8” (200mm)    25/32” x 9/64” (19.84 x 3.57mm)                                            15318                    15218                   12      2.7 lb./1.22 kg
10” (250mm)   31/32” x 11/64” (24.61 x 4.37mm)                                           15310                    15210                   12      5.4 lb./2.45 kg
12” (300mm)   1-5/32” x 7/32” (29.16 x 5.56mm)                                            15311                          -                        6       9.0 lb./4.08 kg

ALSO SEE:

  • Mill Files
  • Veneer Knife Files